Quantifi Photonics LabVIEW drivers, version 3.0.0.

Software requirements:

1. LabVIEW 2015+
2. NI PXIPS
3. NI VISA
4. LabVIEW Runtime engine (optional).

Installation instructions:

1. All VI's have been developed in LabVIEW 2018 and converted down to LabVIEW 2015+.

2. The "Quantifi Photonics Ltd" folder contains all the LabVIEW code required to run Quantifi Photonics PXIe and MATRIQ modules.

3. For VI's to work as expected you should copy the entire "Quantifi Photonics Ltd" folder into the directory "C:\Program Files\National Instruments\LabVIEW 20XX\instr.lib\". Where XX is the replaced with the version of LabVIEW you are developing in.

4. Manually add the VISA resources in NI MAX by right clicking on "Network Devices" and choosing "Create New VISA TCP/IP Resource" and add/select the QP Server entry by following the wizard.

5. To run executables go to Quantifi Photonics Ltd > Control Panels and run required exe files or Quantifi Photonics Ltd > QP LASER> Laser > build > QP LASER Soft Front Panel > LASER Soft Front Panel > QP Laser.exe.

6. To run the soft front panels, (for example) go to Quantifi Photonics Ltd > QP Laser > Laser > QP Laser Soft Front Panel. Then open QP Laser Soft Front Panel project file.

7. Expand QP VXI LASER Driver.lvlib and then Soft Front Panel. Click on QP LASER Soft Front Panel.vi.

8. Select the VISA resource previously added using NI Max from Chassis VISA Resource Name.

9. If more than one Laser module is present in the chassis select it using the Module dropdown option.


For technical support, please email support@quantifiphotonics.com.
